Although it may appear difficult, connecting a Canon printer to your network is actually quite simple if your router has a WPS (Wi-Fi Protected Setup) button. The WPS technique makes things easier by doing away with the necessity for manual network password entry. To ensure a flawless printing experience, go through the progression of connect canon printer using wps button in this blog.
Items You’ll Require
- Make sure your Canon printer is turned on and ready to go.
- Wireless Router with WPS Capability, Verify that the WPS button is there on your router.
- Computer or Mobile Device, For any possible further configuration.
- Robust WiFi Protected Setup, or WPS, is a network security standard that aims to streamline the development of connecting devices to safe wireless networks. You don’t need to manually input your Wi-Fi password to instantly connect your Canon printer to your home network when you use WPS.
Comprehensive Guide to connect canon printer using wps button
Step 1: Get Your Printer Ready
- Turn on Your Printer: Validate that your Canon printer is on and effective. Use the display screen to access the Wi-Fi setup settings if your printer has one.
- Access setup menu: To access the Wireless Setup menu, use the control panel on the majority of Canon printers. Search for a button labeled “Menu,” “Setup,” or a gear-like icon.
Step 2: Find WPS Switch
- Discover the WPS Knob: Look for the WPS switch on your wireless router. In addition to the usual “WPS” label, it could also have a symbol that looks like two arrows forming a circle. It is frequently found on the router’s side or rear.
- Verify the WPS Status: An indicator light on certain routers indicates when WPS is active. Ensure that WPS pairing is enabled on your router.
Step 3: Get Your Printer’s WPS Process Started
- Activate WPS mode: To activate WPS mode on your Canon printer, go to the control panel’s wireless setup or WPS section. Choose “Wi-Fi Protected Setup” or “WPS” to start the connection process.
- Choose the WPS Protocol: You could be asked to select between “Push Button” and “PIN” by your printer. Since you anticipate using the WPS switch on your router, choose “Push Switch.”
Step 4: Turn on your router’s WPS feature.
- Press the WPS switch: Press the WPS switch on the router two minutes later choosing the WPS option on your printer. The WPS pairing procedure will begin as a result.
- Await Connection: Your printer will look for the router and make an effort to establish a connection. The printer will indicate that it is connecting with a message displayed on its display. Hold off till the procedure is over.
Step 5: Verify the Link
- Examine the Printer’s Display: If the connection to your network has been established successfully, the printer ought to show an icon or a confirmation message.
- Print a Network Configuration Page: The setup menu on a lot of Canon printers enables you to print a network configuration page. You can verify on this page if your printer is allied to the apt network.
Step 6: Install printer software and drivers.
- Download and Install Drivers: Download and install the required software and drivers from Canon’s official website ‘https ij start canon’ to make sure your printer is compatible with your computer or mobile device.
- Sync a Printer with Your Device: Steer to the printer settings on your device, then select your Canon printer. If the connection was successful, it should show up as a network printer when connected.
Troubleshooting Advice to connect canon printer using wps button
In the event that you run into problems while configuring, take into account the following advice:
- Make Sure WPS Is Activated: Confirm that your router has WPS permitted. Certain routers have a designated WPS mode or setting.
- Verify Printer and Router Distance: Make that the Wi-Fi signal from your router can reach your printer. If needed, move the printer in closer proximity to the router.
- Device Restarts: To restore their network connections, restart your router and printer.
- Refer to the Instruction Manual: For detailed instructions unique to your model, consult the user manual that came with your Canon printer.
End thoughts
One quick and easy way to get your Canon printer connected to your network is to connect canon printer using wps button. You can enjoy wireless printing without the inconvenience of manually inputting network passwords by following the above-described methods.