Skip to content

Canon PIXMA MG3620 Setup

The Canon PIXMA MG3620 setup is basic. Connect the printer to a power source after unpacking it. To locate drivers, visit the Canon website or download the Canon PRINT app. Just follow the instructions on the screen to install. Hold down the printer’s WiFi knob until the power light illuminates if you’re using Wi-Fi. Lastly, join the same Wi-Fi network with your smartphone. Load paper and insert ink cartridges. To check that everything is working, try printing or scanning. The printer can print wirelessly from cell phones and laptops.

Canon MG3620 Manual Setup

  1. Unbox the printer and remove all of the packaging materials, including the safety tapes.
  2. Plug in the printer and push the power knob to start it.
  3. Open printer front concealment to access the cartridge partition.
  4. The cartridge container will relocate to the middle.
  5. Insert ink cartridges into suitable slots.
  6. Black cartridge on the right.
  7. Color cartridge to the left.
  1. Press down until they click in place.
  2. Pull the tray and put the paper in it which must be accurate in size.
  3. Adjust the guidelines to keep the paper in position without bending it.
  4. Visit the official Canon website Ij.start.canon.
  5. Download the drivers and software
  6. Connect the printer to your wireless network.
  7. Generate a test page to confirm good connection and configuration.

WPS Configuration PIXMA MG3620

To use WPS to configure your Canon PIXMA MG3620 follow the given points:

  • Confirm that printer is on and allied to WiFi.
  • Press the printer’s ‘Wi-Fi’ knob until the alert lamp flashes. Next, press the ‘WPS’ knob.
  • Push the WPS knob. The printer will try to link to the network.
  • When the connection is successful, the printer’s Wi-Fi bulb stops flickering and remains steady.
  • To complete the canon pixma mg3620 wifi setup, go to Canon’s website and download and install the printer software.

Canon PIXMA MG3620 Setup with App

Here is how to use the app for Canon Pixma Mg3620 wireless setup by doing the following:

  1. Download the Canon SELPHY/PRINT Inkjet app.
  2. Subsequently use an identical network for printers.
  1. Turn on the PIXMA MG3620 and check it is in Wi-Fi mode.
  2. Launch Canon PRINT app.
  1. Choose “Add Printer” and then trail guidelines to link printers to the network.
  2. Once linked, you may start printing right from the app.

Problems with Canon PIXMA MG3620 setup and fixes

It may be difficult to set up the Canon PIXMA MG3620 at times, however the following common problems and their fixes can help:

1.   Printer Not Connecting to Wi-Fi

Fix:

  • The printer has to be within the router’s range.
  • Verify that you have entered the right password and selected the appropriate Wi-Fi network.
  • Turn the printer and router back on.
  • Go to the printer’s control panel to re-establish a Wi-Fi connection. Open the Settings menu and select Wireless LAN setup.

2. Driver Installation Issues

Solution

  • Go to the Canon website to get the most recent operating system drivers.
  • Update the operating system on your computer.
  • Antivirus software should be temporarily disabled during installation since it may create issues.

3. The computer does not identify the printer.

Solution:

  • When utilizing a wired connection, ensure the USB cord is properly attached.
  • Try using a diverse USB port.
  • Start again your computer and printer.
  • Make sure both devices are on the same network if you’re using a wireless connection.

4. Paper Jams

Solution:

  • Gently remove any paper jams from the printer by opening the lid.
  • Size and paper kind must be accurate
  • Avoid overfilling the paper tray.

5. Ink Cartridge Issues

Solution

  • Validate that the ink cartridges are positioned appropriately before removing and replacing them.
  • Examine fresh cartridges for any protective tape that has to be taken off
  • Replace any cartridges that are empty or have expired with fresh ones.

6. Print quality issues.

Solution:

  • Use a printer cleaning tool from the control panel or software.
  • Check and position the print head as needed.
  • Accurate paper must be used for printing.

7. Error messages.

Solution:

  • For specific error codes, consult the Canon support website or the printer handbook.
  • Use the troubleshooting techniques specified for the particular issue.

Canon firmware update for the PIXMA MG3620

Use these procedures to update the firmware on your Canon PIXMA MG3620:

  • Verify that the same network is connected to your printer.
  • Print a status page from your printer’s control panel to see the current firmware version.
  • Visit Canon website and copy the fresh firmware apprise for the MG3620.
  • Open the copied file on your device.
  • Wait for the update to complete and confirm that the printer resumes. Verify the firmware version to make sure the elevation worked.

Resetting the Canon PIXMA MG3620

Use these methods to reset your Canon PIXMA MG3620:

  • Turn on the printer if it isn’t already.
  • Press the Home knob on the printer control panel to bring up the menu.
  • Canon PIXMA MG3620 Setup (represented by a wrench icon) may be selected using the arrow knobs, then hit OK.
  • Scroll to Device settings and then select Reset settings.
  • Select Reset all settings to return the printer to its original configuration.
  • To confirm and complete the reset, adhere to the instructions. The printer will go back to its original configuration.

FAQs

How do I know I’ve completed the setup successfully?

The printer successfully establishes a connection with your Wi-Fi network. Your Mac or mobile device’s printer state is either “Ready” or “Online.”You have no trouble printing a test page.

Can I setup the MG3620 on macOS without driver disks?

By downloading the most recent drivers and software from the Canon website during the installation process, you may set up the MG3620 on macOS without the need for driver CDs.

Does MG3620 support mobile printing?

Yes, you can print documents and images straight from your smartphone or tablet using Wi-Fi with the MG3620 due to Canon’s PRINT Inkjet/SELPHY software.

error: Content is protected !!