Skip to content

Canon MG3600 Wifi Setup 

Are you trying to find a simple method to connect your Canon MG3600 printer to the Internet? This inclusive tutorial will take you step-by-step over the Canon MG3600 Wifi Setup procedure, regardless of whether you’re using it for home, business, or hybrid purposes. 
You may wirelessly print, scan, and control your Canon MG3600 from any device connected to the same network by the conclusion of this tutorial. You’ll also discover answers to typical problems like Canon MG3600 Setup Wifi difficulties and connection failures.  

Why Pick the Canon MG3600?

Canon’s PIXMA MG3600 series is well known for its wireless features, tiny size, and high-resolution printing. It makes Wi-Fi Direct, mobile printing, and easy cloud access possible. This multipurpose printer guarantees seamless cross-platform operation whether you’re using any device. 

However, you must correctly finish the Canon MG3600 wifi setup process in order to get the most out of it. Let’s get started. 

The Canon MG3600: Why Choose It? 

The Canon PIXMA MG3600 series is renowned for its wireless capabilities, high-resolution printing, and small size. It facilitates simple cloud access, mobile printing, and Wi-Fi Direct. This multipurpose printer guarantees seamless cross-platform operation whether you’re using any device. 

However, you must correctly finish the Canon MG3600 wifi setup process in order to get the most out of it. Let’s get started. 

Canon MG3600 WiFi Configuration: A Comprehensive Guide 

There are two primary ways to establish a wireless connection with your Canon MG3600: 

1. Computer Use (Suggested for the majority of users) 

2. Using a mobile device instead of a computer 

Method 1: Using a Computer to Set Up Canon MG3600 WiFi 

1. Get your printer ready. 

  • Turn on your printer after plugging it in. 
  • Verify that the power lamp is consistently green. 
  • Holding down the WiFi knob will cause the warning bulb to flash once. 
  • Let go of the button. It will flash the Wi-Fi lamp. 

 2. Get the setup software and run it. 

  • Go straight to ij.start.canon or visit the official Canon website. 
  • Get the Canon MG3600 Setup software for Windows or macOS. 
  • Start the installation process by opening the downloaded file. 
  • When asked, choose Wireless Connection. 

3. Connect to the Wi-Fi network. “Connect via Wireless Router” . 

  • After choosing the SSID for your network, enter the Wi-Fi password. 
  • The printer will make an effort to connect. The Wi-Fi bulb will remain bright and cease blinking when it has been successful. 

4. Full Setup 

  • To install drivers and extra applications, adhere to the on-screen directions. 
  • To make sure the setup is finished, run a test print. 

The wireless setup for your Canon MG3600 is now complete. From your computer or mobile device, you may print wirelessly. 

Method 2: Canon MG3600 Wireless Configuration Without a PC 

Does the Canon MG3600 need a computer in order to connect to WiFi? 
If you don’t have a computer, you may set up the Canon MG3600 Wifi using your tablet or smartphone. Here’s how:

1. The first step is to install the Canon PRINT Inkjet/SELPHY app.

  • Accessible via app Store. 
  • Install the app, then launch it. 

 2. Turn on the printer’s Wi-Fi setup mode. 

  • Activate the printer. 
  • Holding down the WiFi key will cause the warning bulb to flash once. 
  • Make sure the Wi-Fi lamp is flashing and release the Wi-Fi button. 

 3. Link the mobile device to the printer 

  • Steer to the WiFi settings on your phone. 
  • The Canon MG3600 network will appear as “Canon_ij_xxxxxx” on the screen. 
  • Go back to the application and select Start Setup. 
  • Enter the keyword for your home WiFi after selecting it. 
  • Your WiFi will be instantaneously connected to the printer. 

The Canon MG3600 may now be connected to Wi-Fi without a computer.

Why Is It Hard for My Canon MG3600 to Connect to WiFi? 

Are you having problems connecting? Typical causes and remedies include the following: 

1. There is an error in the Wi-Fi password 

Check your network credentials again. The setup will fail if the password is entered incorrectly. 

2. Outdated firmware or drivers

Verify that the printer and device software are up to date. To get the current drivers, go to ij start canon. 

3. Problems with the router 

Bring the printer nearer to your router and restart it. Avoid obstacles like walls and other electrical devices that might cause disruptions 

4. Wi-Fi Signal Interference 

Ensure that your router is compatible with 2.4GHz Wi-Fi as the MG3600 does not support 5GHz networks. 

5. Device Compatibility 

Make sure the network on your computer or mobile device matches the one you are trying to connect your printer to. 

If none of these works, restore the printer to factory settings and try the setup again. 

Canon MG3600 WiFi Setup for macOS and Windows 

Although the Canon MG3600 configuration is nearly the same on Mac and Windows, there are a few small variations: 

For Windows  

  • To obtain the setup file in.exe format, visit ij.start.canon.
  • Choose Devices & Printers from the Control Panel to confirm that the installation was successful. 

Regarding macOS 

  • Get the macOS setup file in.dmg format.
  • Go to System Preferences > Printers & Scanners to see your printer’s current status.
  • During installation, give permissions if requested. 

How to Use the Canon MG3600 for Wireless Printing 

After completing the Canon MG3600 Wireless Setup, you may print using: 

  • AirPrint (macOS/iOS). No extra drivers are required. 
  • Use apps that have been approved by Mopria (Android). 
  • Both iOS and Android users may use the Canon PRINT app. 
  • Print Queue in Windows. Choose MG3600 under “Devices and Printers.” 

Extra Configuration Choices 

1. The WPS Push Button Approach 

  • If your router supports WPS, press and hold the Wi-Fi button on the printer until the light begins to flash.
  • Press the WPS button on the router within two minutes. 
  • The printer will connect on its own. 

2. Configuring a USB Cable 

  • If wireless isn’t working, use the Canon application to connect via USB before switching to wireless. 

Canon MG3600 vs. TR4722 Configuration Comparison: 

Canon TR4722 Setup: 

  • Using the SELPHY app and Canon PRINT Inkjet. 
  • LCD screen arrangement that is easier to follow. 
  • Wi-Fi setup via QR code and Wireless Direct are supported. 
  • Compatible with Mopria and Apple AirPrint. 

The Canon MG3600 Setup: 

  • No display; WPS or software are mostly used for setup. 
  • Setup may be more labor-intensive and manual. 
  • Supports Google Cloud Print and Apple AirPrint. 
  • For mobile setup, the Canon PRINT app is required. 

Faq

Can Canon MG3600 connect to 5GHz WiFi networks?

No, in order to print or scan wirelessly, the Canon MG3600 series can only connect to 2.4GHz WiFi networks; it cannot establish a connection with 5GHz networks.

Is WPS the only way to set up Canon MG3600 WiFi?

No, you may manually configure the printer’s software and enter network information using the linked computer or mobile device, or you can use WPS to set up WiFi.

Can I use Canon MG3600 without WiFi connection?

It is possible to print and scan straight from a connected computer without the need for wireless networking by using the Canon MG3600 via USB connection instead of WiFi.

error: Content is protected !!