Skip to content

Canon Ts302 Setup

For convenient and effective usage at home or in small workplaces, Canon created the TS302, a wireless inkjet printer. Unpacking the printer, beavering it in, and putting in the paper and ink containers are all part of the setup process. The Canon PRINT Inkjet/SELPHY app for mobile devices or the Canon website for PC drivers are then downloaded and installed. To connect the printer to Wi-Fi using WPS or conventional Canon Ts302 Setup, according to the on-screen instructions. With features like AirPrint and Google Cloud Print, as well as the flexibility to print from desktops, tablets, or smartphones, the TS302 provides a smooth and easy-to-use experience.

Canon Ts302 Setup Manual

For manual setup of Canon Ts302 follow the given steps below:

  • Remove any protective tapes and materials from the printer after unpacking it.
  • Turn on the printer after plugging it in.
  • Fill the tray with paper and insert the ink cartridges.
  • If necessary, get the user manual from ij start canon website.
  • For physical setup, adhere to the printed or on-screen directions.
  • Use USB or WiFi to link the printer to your device.
  • Fix the obligatory software and drivers from the Canon website.
  • To guarantee correct installation, test the print.

Canon Ts302 Wireless Setup

For Canon ts302 Wireless Setup you can trail these points:

  • Make sure Wi-Fi is turned on and turn on the printer.
  • Holding down the Wi-Fi button will cause the lamp to flash blue.
  • To link the printer, press the WPS knob on your network.
  • As an alternative, setup Wi-Fi manually using the Canon PRINT app or computer software.
  • Use the blinking light to verify the Wi-Fi connection.
  • If required, download drivers from Canon’s website.
  • Try printing wirelessly to see if the connection works.

Canon Ts302 Setup using USB

It’s easy to setup Canon Ts302 Setup using USB and here are the directions:

  • Turn on the printer after unpacking it and plugging it in.
  • Load paper and install ink cartridges.
  • Go to the official Canon website.
  • Install the operating system’s TS302 printer drivers after downloading them.
  • Use a USB to link the printer to the PC.
  • Make sure both devices have the cord firmly fastened to them.
  • When installing, adhere to the on-screen directions.
  • When asked, select “USB Connection.”
  • To authorize that the linking is working, print a test page.
  • In the printer settings on the computer, validate that the printer is picked as the default device.
Canon TS302 Setup

Canon Pixma Ts302 Setup with App

You can use canon app to set it up by following these tips:

  • Get the Canon PRINT Inkjet/SELPHY app.
  • Turn the printer on and turn on Wi-Fi.
  • Choose “Add Printer” after launching the application.
  • To establish a Wi-Fi or Bluetooth connection, adhere to the in-app instructions.
  • Make sure that the printer and mobile device are associated with the identical network.
  • Finish Canon Ts302 Setup and run a test print from the application.
  • Use the app to scan, monitor, and maintain your printer.

Canon Ts302 Setup Mac

Follow these points for Canon Ts302 Setup Mac:

  • Validate the printer is on and linked to the wireless network.
  • Go to System Preferences on Mac and choose Printers & Scanners.
  • A new printer may be added by clicking the “+” button.
  • Click “Add” after choosing the Canon TS302 from the list.
  • Transfer the drivers from the website when requested.
  • Printing an example document will test the connection.
  • For smooth printing without the need for extra drivers, use AirPrint.

Canon Ts302 Setup Issues and Troubleshooting Tips

The following are typical Canon Ts302 Setup problems and solutions:

1. Problems with Wi-Fi Connections

  • Verify the network: Validate that the router is on and your WiFi is steady.
  • Enter your credentials again: Use the right Wi-Fi password to reconnect.
  • WPS Configuration Errors: After starting the Canon Ts302 Setup, make sure your router is compatible with WPS and hit the button within two minutes.

2. The device’s printer was not detected.

  • Restart the device (PC or smartphone) and the printer.
  • Authenticate that both are allied to the identical wireless network.
  • Reinstall or update the Canon PRINT software or drivers for your computer.

3. Feed problems or paper jams

  • Carefully remove the trapped paper.
  • Verify that there are no stuck sheets by aligning the paper tray.

4. Issues with Print Quality

  • To clean the print heads, use the printer’s maintenance tool.
  • Make use of the appropriate paper type and reliable Canon ink holders.

5. Errors in Driver Installation

  • Get the fresh drivers from the Canon website.
  • Authenticate that it works with your functioning system.

6. Problems with Mobile Printing

  • Make sure the Canon PRINT app is loaded on your smartphone.
  • Turn on your device’s Wi-Fi and Bluetooth.

Canon ts302 Firmware Update

Your Canon TS302’s firmware should be updated for best compatibility and performance. Take these actions:

  • Make sure that the printer has enough ink and paper, is turned on, and is linked to a reliable Wi-Fi network.
  • Find the TS302 on Canon’s official support page, then download the operating system-compatible firmware update program.
  • Unveiling the tool and observing the commands. If asked, connect the printer to your computer by Wi-Fi or USB.
  • The application will identify the printer and provide the updates that are available. Click “Update” to get started.
  • Restarting the printer will implement the adjustments when the update is finished.

Canon Ts302 Reset

Use these procedures to reset the Canon TS302 printer:

Factory Reset (Settings and WiFi):

  • Activate the printer.
  • Release the Stop button once the alarm bulb has flashed 19 times.
  • By doing this, all settings—including Wi-Fi—are returned to their initial settings.

Wi-Fi Reset Only:

  • Holding down the Wi-Fi button will cause the power lamp to flash.
  • To turn off the wireless connection, press the Stop button and then the Wi-Fi button once more.

Cycle of Power:

  • For five to ten minutes, turn off the printer and unblock it.
  • Restart it by plugging it in again.

Canon Ts302 Setup Advanced Settings

Here are few tips for Canon Ts302 Setup advanced settings:

Configuring Wi-Fi:

  • Use the Canon PRINT Inkjet/SELPHY app to access the sophisticated Wi-Fi configuration.
  • For static IPs or secret networks, use manual setup.

Printer Preferences:

  • Go to your computer’s printer settings.
  • For certain jobs, change the default settings, paper type, and print quality.

Printing without borders:

  • Turn on borderless printing for images and designs using the printer’s sophisticated features.

Mode of Power Saving:

  • Use the printer menu or driver software to set up the sleep timer and auto-power-off features.

Options for Custom Printing:

  •  To configure duplex (manual), page scaling, or grayscale printing, use the driver.