Canon Ts3722 Setup
The Canon TS3722 is a wireless, small, multipurpose inkjet printer that makes printing, scanning, and copying simple. Its wireless connection makes it perfect for home usage, enabling printing from mobile devices via Mopria, AirPrint, and the Canon PRINT app. The setup process is simple: load paper, install the included ink cartridges, and connect to Wi-Fi after unpacking. To finish canon ts3722 setup, use the Canon PRINT app or online setup instructions. It is adaptable for daily chores and light picture printing since it has an easy-to-use control panel, produces good print quality, and provides choices for borderless photo printing.
Canon Ts3722 Wireless Setup
For canon ts3722 wifi setup follow these tips:
- Unpack the Canon TS3722 and connect it in. Turn it on, then insert the paper and ink cartridges.
- Hold down Wireless knob on printer until Power light flickers, then let go. The Wi-Fi indicator is ready for setup when it begins to flash.
- Get the Canon PRINT Inkjet/SELPHY app for mobile devices.
- Get the driver for PCs from Canon’s official website.
- To link the printer to the network, use the Canon PRINT app and stick to the commands.
- Verify the connection on the computer or app. Wireless printing across devices is now possible with the printer attached.
Canon Pixma Ts3722 Setup Manual
Follow the steps below for manual setup of the Canon TS3722:
- Take out the tape and all of the printer’s packing.
- Slide the supplied cartridges (black and color) in until they click into position after opening the front cover.
- Load plain or picture paper into the back tray, adjust the paper guides, and validate that the guides fit tightly.
- Press the power knob after plugging the printer in.
- Use the online setup at canon.com/ijsetup or transfer Canon PRINT app.
- To attach printers to the network, trail commands in the app.
- If necessary, install drivers on your computer. To verify setup, conduct a test print.
- For easy wireless printing, set up mobile printing (AirPrint, Mopria).
Canon Printer Ts3722 Setup with App
Use the Canon PRINT app to configure your Canon TS3722 printer by doing the following:
- Press the power knob after plugging the printer in.
- Load paper into the tray, insert ink cartridges, and open the front cover.
- Get Canon SELPHY/PRINT Inkjet app.
- To choose a printer model, use an app and observe directions. You may connect the printer to your Wi-Fi network using the app’s instructions.
- Verify your printer’s connection, finish any necessary upgrades, and print a test page.
- Start using the app to print, scan, or copy.
- Wireless printing is made easy and effective by this software setup.
Canon Ts3722 Setup Issues
Typical Canon TS3722 printer configuration problems include:
- Wi-Fi connectivity issues: With dual-band routers in particular, printers may not be able to connect to the network. Since the 2.4 GHz band is usually more suitable, validate that the printer is on it.
- App Detection Issues: Occasionally, the Canon PRINT app is unable to identify the printer. Validate that the printer and mobile device are on the identical Wi-Fi network and start them both again.
- Problems with Ink Cartridge Recognition: The printer might not be able to identify the cartridges. Check for protective tape and reinstall them.
- Issues with Driver Installation: Drivers may not install properly on some PCs. Visit Canon’s website to get the recent drivers.
- Errors with paper jams or feeds: Verify that the paper is loaded properly and look for any obstacles.
A more seamless canon printer setup may be ensured by resolving these.
Canon Ts3722 Firmware Update
Use these procedures to upgrade the firmware on your Canon TS3722 printer:
- Validate that a reliable Wi-Fi network is linked to the printer.
- Press the Setup knob on the printer’s control panel, which is usually indicated by a gear symbol.
- Scroll to Device Settings > Firmware Update > Install Update using the arrow keys.
- To begin the updating process, press OK. The current firmware will be moved and fitted on the printer.
- To apply the update, restart the printer after finishing.
- It is advantageous to keep the firmware updated since it adds new features and enhances performance.
Canon Ts3722 Reset
Use these procedures to reset the Canon TS3722 printer:
- Validate that the printer is on.
- Find the “Stop” switch on the control panel of the printer.
- Holding down the Stop switch will cause the alert bulb to flash twenty-one times.
- Let go of the knob. The factory reset is started, erasing all settings, including Wi-Fi and personal preferences.
- The printer will lapse to its inventive factory settings if you wait for it to reset.
- Reconfigure the Wi-Fi settings if you intend to use it wirelessly by following the manual setup or Canon PRINT app setup instructions.
- This reset technique efficiently fixes problems with functionality or connectivity.
Canon Ts3722 Setup Issues Troubleshooting
Try the following troubleshooting procedures if you’re experiencing problems configuring your Canon TS3722:
Problems with Wi-Fi Connections:
- Validate that the router and printer are near to one another.
- Try reconnecting with the Canon PRINT app or WPS setup after restarting your router.
Printer Not Detected by Canon PRINT App:
- Verify that the printer and phone are connected to the identical wireless network.
- Try the setup procedure again after restarting the printer and the application.
- If problems continue, try reinstalling the Canon PRINT app.
Errors in the ink cartridge:
- Verify that cartridges are compatible with the TS3722 model and are installed appropriately.
- Authenticate that cartridge connections are clean and positioned correctly.
A jammed paper or a loading problem:
- Check for obstacles and remove any sticky paper.
- Validate that the guidelines are aligned and correctly reload the paper.
Unfinished Configuration:
- Restart the setup from scratch, paying close attention to each step.