Ij Start Canon Ts3500 Setup

If you’re prepared to complete your Canon TS3500 setup, following the precise installation procedures assures seamless configuration and excellent printer performance. Use the steps below to get your printer connected, install the appropriate software, and make sure everything runs correctly.

Confirm that you have the power cable, ink cartridges, and all extra accessories.
Power on the printer.
Substantiate they are firmly in place and adhere to the color-coding instructions.
Insert material inside the input part of the tray.

Insert the accompanying CD into your computer and begin the setup program. Follow the on-screen prompts.
Pay close attention to the detailed instructions displayed throughout the installation if you are setting up a wireless connection.
Once the software installation is complete, print a test page to ensure that the printer is operating appropriately.

Note: These instructions serve as a general reference. Depending on your operating system and printer settings, certain menus or prompts may differ. For more thorough assistance, consult the Canon TS3500 Wifi Setup manual if it is available. The Canon support website may potentially give the latest information and troubleshooting resources for your individual model.

Canon Ts3500 Setup using WPS Method

Make sure the ON bulb is illuminated before turning on the printer.

Launch the printer setup program and select Wireless Connection when asked.

Complete the installation, restart your computer

Canon Ts3500 Wifi Setup

Find the WPA (or WPS) button in the network settings on your Wi-Fi router.
After turning on the printer’s Wi-Fi, hold down the router’s WPA/WPS button for two minutes.
When the printer connects successfully, the ON bulb will cease blinking and remain steady.
If you have not downloaded the program yet, you may obtain it from: https://ij.start.canon
Enter your password and Wi-Fi network name (SSID) when requested during setup.

How to connect Canon Ts3500 Printer to Wifi

After turning on the printer, substantiate setup mode is selected.
Up until the ON lamp flashes, press the wifi button.
After turning on the printer’s Wifi, now you need to move for Canon Ts3500 Connect to Wifi.
Once communication is established, the ON lamp will cease to flash.
Launch the programme, pick wifi connectivity, and adhere to the directions.

Canon Ts3500 Printer Not Responding

Substantiate the printer is turned on.
Authenticate the power cord is firmly attached.
Validate the USB cable’s correct connection if you’re using one.
Switch off the printer and PC.
After a short while, turn them back on.
Remove any unfinished print jobs from the print queue on your PC.
In Windows, restart the print spooler service; in macOS, cancel print jobs.
Verify that the drivers and software you have installed are current. Get them at ij.start.canon, the official Canon website.

Validate that the printer is allied to the precise network.
If necessary, adjust the wifi settings.
To test if antivirus or firewall software is impeding printer connectivity, briefly disable it.
Check for any evident faults, paper jams or error lights on the printer.
Make that the ink cartridges are filled to the brim and are placed correctly.
Remove the printer from your computer’s device list and replace it.

Note: You should be able to troubleshoot and fix frequent issues causing your Canon TS3500 printer to not respond by methodically verifying and resolving these points.

Ij.start.canon Ts3500 firmware update

To see the official Canon Ts3500 Wireless Setup page, go to https://ij.start.canon/.
Enter the printer model (TS3500) and select it from the drop-down option.
Select “Drivers & Downloads” from the menu.
Find the latest firmware update for your printer and download it.
Save the firmware file to your computer.
Substantiate the printer is in setup mode before turning it on.
On your PC, launch the firmware update programme.
Installing the firmware upgrade involves following the steps.
After everything is completed, disconnect the USB cable, switch on your printer again, and observe whether the performance has improved.

Ij.start.canon Ts3500 reset process

Substantiate the printer is in standby mode before turning it on.
Continue pressing the Wifi button until the Network lamp illuminates.
Click the Colour button.
While the printer returns to its factory settings, the ON lamp will flash.
The reset is finished when the ON lamp is steady.
Utilise the setup procedure to change your printer’s settings as necessary.

Note: All customised settings, including Wifi network configuration details and other preferences, are deleted upon performing a factory reset.

FAQs

Can I use the Canon TS3500 without WiFi?

The Canon TS3500 can work without WiFi by connecting to your computer using a USB cable. You can print, scan, and copy properly without a WiFi network.

What app do I need for Canon TS3500 setup?

For mobile setup and printing, install the Canon PRINT Inkjet/SELPHY app on your smartphone or tablet. It makes it simple to set up, print, scan, and adjust printer settings wirelessly.

Why does my Canon TS3500 show a flashing alarm light during setup?

A flashing alarm light usually indicates an issue such as low ink, a paper jam, an improperly installed cartridge, or connection failure. Checking the display or software message helps identify the cause.

How do I load photo paper during setup?

Open the rear paper tray, adjust the guides, place photo paper with the glossy side facing up, and gently push it in. Verify the size and kind of paper in the printer’s settings.